Casting Products

A casting gate hold back is a sturdy and practical accessory used in chain link fencing systems to keep swing gates securely in the open position. Its cast construction—typically galvanized steel or malleable iron—makes it ideal for both residential and commercial settings. Here's how it's used:

• The casting gate hold back is a sturdy component used to secure gates in the open position.
• It prevents accidental gate movement due to wind, traffic, or vibration, enhancing safety and control.
• Made from casting process, they offer excellent corrosion resistance with Hot dip galvanizing finish and long-term durability in outdoor environments.
• Commonly installed on chain link or sliding gates in commercial and security fencing systems.

Pressed steel gate fork latches are widely used in chain link fencing systems to secure gates efficiently and affordably. This is combination of Fork and Collar with carriage bolts. Here's a breakdown of their key uses:

• Gate Locking Mechanism: The fork latch secures the gate by dropping over a latch post or frame, holding it closed through gravity or manual placement.
• Padlock Compatibility: Most designs include a hole for a padlock, allowing users to lock the gate for added security—ideal for residential, commercial, or industrial properties.
• Corrosion Resistance Often galvanized or powder-coated, these latches resist rust and environmental wear, ideal for outdoor use.
• Quick and Easy Installation: Typically mounted with carriage bolts or U-bolts to the gate frame and post—no welding or special tools required.
• Low-Maintenance Operation: The gravity-based design means fewer moving parts, reducing the chance of mechanical failure and simplifying upkeep.
• Versatile Gate Applications: Used on single swing gates, double drive gates (with drop rods), and even temporary fencing setups.

Pressed steel forks are specialized fittings used in chain link fencing systems, particularly in gate and hinge assemblies. Here's how they function and where they're commonly applied:

• Gate Hinge Connection: These forks are typically part of a hinge set, used to connect the gate frame to the hinge pin or post. They allow the gate to swing smoothly while staying securely attached.
• Top or Bottom Hinge Support: Depending on the design, pressed steel forks can be used at the top or bottom of the gate, paired with hinge pins or bolts.
• Secure Fit: The fork design grips the gate frame tubing tightly, often secured with bolts or screws, ensuring the gate doesn't wobble or detach.
• Corrosion Resistance Often galvanized or powder-coated, these forks resist rust and environmental wear, ideal for outdoor use.
• Versatile Sizing: Available in various sizes to match standard pipe diameters used in chain link gate frames.